Ultimate Electronic Search System
The Combined Electronic Search System is a revolution in electronic search equipment designed to rapidly and efficiently detect, identify and locate all types of surveillance devices (bugs). Four tried and tested detection methods, namely, a harmonic receiver, a broadband receiver, a non-linear junction detector and a metal detector are integrated into one compact, easy to use unit. Combining four complementary sensor systems together means more effective and efficient search capability. With just one physical sweep of a target area four separate searches are carried out. The Combined Electronic Search System automatically switches between the four sensors using each detection method in turn, five times a second; allowing a continuous display of all detector activity. Each sensor provides information which combines to provide a comprehensive picture of any concealed targets. The information is displayed as an easily understood bar graph.
Additional expert screens give access to more detailed information for each of the sensors. Using multiple detector information in this way improves detection and gives more accurate identification between false alarms and real targets. For the first time four traditional sweep methods are now available in one system meaning that this is the only electronic search tool needed.
Features
Designed for non-technical users
Integrated use of sensors optimizes detection of devices
Simplified presentation of complex information
User-friendly touch-screen controls
Clear indication of targets
Simultaneous sensor sweep significantly reduces search time
Cost-effective solution for bug detection
Ergonomic light-weight design for comfortable operation
Compact for easy transportation
Integrated scanning receiver, non-linear junction detector, broadband receiver and metal detector
Transmitter Detector
Broadband Detector:Frequency range 10 MHz to 10 GHz
Sensitivity Better than -45 dBm
Dedicated detectors GSM, IS-136, IS-95, DECT
Audio output AM
Harmonic Receiver:Frequency range 10 MHz to 10 GHz
Sensitivity Better than -50 dBm
Sweep speed 250 ms approximately
Frequency resolution 128 kHz, 64 kHz, 32 kHz, 16 kHz, 8 kHz
Audio output Wideband FM (RF)
Passive Electronic Device Detectors
NLJD
Transmit frequency range 830 MHz to 1000 MHz
Transmit mode Approved modes for CE and FCC
(factory pre-set) or un-approved user defined
Transmit power level Pulsed to +27 dBm (0.5 W) variable
Audio output Level indication
Metal Detector:
Frequency Approximately 10 kHz
Detection rangeMetal enclosure detected at 10 cm through Celcon block
Metal enclosure detected at 10 cm through house brick
General
Search head;Single integrated, pivoted enclosure with concealed cable runs. Circularly polarized NLJD antennas
Search head reach 1 m from hand grip - 1.4 m fully extended
Battery pack 2 x Li-lon D-cell externally rechargeable
Battery life 2 hours continuous use, approximately
Size 0.68 M
Weight 3.2 kg
Environmental Operating temperature range +5ºC to +35ºC
Approvals EN300-220, EN300-330, EN61010, FCC Section 47, Part 15
Additional expert screens give access to more detailed information for each of the sensors. Using multiple detector information in this way improves detection and gives more accurate identification between false alarms and real targets. For the first time four traditional sweep methods are now available in one system meaning that this is the only electronic search tool needed.
Features
Designed for non-technical users
Integrated use of sensors optimizes detection of devices
Simplified presentation of complex information
User-friendly touch-screen controls
Clear indication of targets
Simultaneous sensor sweep significantly reduces search time
Cost-effective solution for bug detection
Ergonomic light-weight design for comfortable operation
Compact for easy transportation
Integrated scanning receiver, non-linear junction detector, broadband receiver and metal detector
Transmitter Detector
Broadband Detector:Frequency range 10 MHz to 10 GHz
Sensitivity Better than -45 dBm
Dedicated detectors GSM, IS-136, IS-95, DECT
Audio output AM
Harmonic Receiver:Frequency range 10 MHz to 10 GHz
Sensitivity Better than -50 dBm
Sweep speed 250 ms approximately
Frequency resolution 128 kHz, 64 kHz, 32 kHz, 16 kHz, 8 kHz
Audio output Wideband FM (RF)
Passive Electronic Device Detectors
NLJD
Transmit frequency range 830 MHz to 1000 MHz
Transmit mode Approved modes for CE and FCC
(factory pre-set) or un-approved user defined
Transmit power level Pulsed to +27 dBm (0.5 W) variable
Audio output Level indication
Metal Detector:
Frequency Approximately 10 kHz
Detection rangeMetal enclosure detected at 10 cm through Celcon block
Metal enclosure detected at 10 cm through house brick
General
Search head;Single integrated, pivoted enclosure with concealed cable runs. Circularly polarized NLJD antennas
Search head reach 1 m from hand grip - 1.4 m fully extended
Battery pack 2 x Li-lon D-cell externally rechargeable
Battery life 2 hours continuous use, approximately
Size 0.68 M
Weight 3.2 kg
Environmental Operating temperature range +5ºC to +35ºC
Approvals EN300-220, EN300-330, EN61010, FCC Section 47, Part 15