Thermal Imager
The Surveillance Thermal Imager is a simple to use night vision camera for Police, Coast Guard, Border Guards, Custom and Security Guards. Easily fitted with a range of lenses from 50mm to 150mm depending on the requirement.
Also available is a Digital Spread Spectrum version of the Image Transmission System operating on 2.45GHz which has the following benefits:
-Super long range
-Secured and encrypted
-License free
-High power
-Internal/external configuration
-Multi channel
Technical Specifications: 600-305 Surveillance Thermal Imager
| Spectral range |
7-14 micron |
| Sensor type |
Un cooled FPA, ferroelectric |
| Resolution |
320 x 240 pixels |
| Sensitivity |
<0.1C |
| Interchangeable objective lenses |
50mm f1, 75mm f0.8, 100mm f1, 150mm f1, 50-150mm zoom (Germanium) |
| Video output |
Yes |
| Data display |
Provides time and date |
| EMC |
EEC regulation 89/336 |
| Sealing |
IP55 |
| Operation temperature |
- 20°C to 50°C |
| Weight (excluding lens) |
2.2kg |
| Dimensions (excluding lens) |
Length 310mm, Width 115mm, Height 156mm |
| Internal battery life |
4 hrs |
Optional Image Transmission
| Antenna impedance |
50 Ohms |
| Transmitter frequency |
1394MHz |
| TX power output |
500mW (max) |
| Oscillator |
PLL (Phase Locked Loop) |
| Channel bandwidth |
10MHz |
| Video input/output |
1V p-p |
| Video output |
NTSC. E1A 525 lines 60Hz |
| Modulation method |
Frequency modulation (FM) |
| Current consumption |
800mA additional |
| Indoor range |
Typically 50 to 100m |
| Outdoor range |
More than 100m |
| Base station monitor |
6 inch |
| Operation temperature |
-25°C to 60°C |
| Base station can be operated on mains 110/240v or for 2 hours minimum on the built in rechargeable battery |
| Powered by a Ni-MH rechargeable battery |
| The base station is housed in a Pelican case 460 x 320 x 180mm |