Transistors, diodes and integrated circuits
all contain nonlinear diode junctions that create the actual semiconductor
device. The BOOMERANG4 ™ Nonlinear Junction Detector will find these
components used in surveillance transmitters (audio and video), hidden
microphones, infrared and ultrasonic transmitters tape recorders and other
covert eavesdropping devices hidden in walls, ceilings, bookcases, plants,
furniture, etc., EVEN WHEN THEY’RE NOT TURNED ON!
The BOOMERANG4 is simple to use and extremely accurate. Its antenna is
skimmed over the surface being swept. Most electronic circuits can be
detected for several feet even through dense material.
How Boomerang4 ™ Works...
The BOOMERANG4 ™ transmits a low power microwave signal from its antenna.
When the signal is received by a transistor, diode, or other semiconductor in
a covert listening device or "bug", the semiconductor radiates or
reflects radio frequency energy called harmonics.
The Boomerang’s supersensitive receiver detects this energy. The operator
can quickly identify the presence of hidden electronic devices.
State of the Art Technique
Previous nonlinear junction detectors have had difficulty differentiating
between semiconductors and dissimilar metals false returns caused by sheet
rock screws, steel studs, paper clips, rebar, etc.
BOOMERANG4 ™ detects two different types of harmonic signals, displaying
the difference between an actual bug and a false return caused by dissimilar
metals.
Semiconductor components primarily radiate a frequency that is two times
that of the signal from BOOMERANG4's transmitter. This signal is called the
second harmonic. Upwards of 90% of the signal radiated by a semiconductor is
second harmonic.
Dissimilar metals not used in semiconductors radiate a significant quantity
of a signal that is three times that of the BOOMERANG4's transmitter. This is
called the third harmonic.
The BOOMERANG4's antenna mounted display shows the level of both signals.
The operator simply visually compares the levels of second and third
harmonics on the LED bar graph meters to instantly determine whether a bug or
a false return has been detected.
High Reliability
BOOMERANG4 ™ utilizes surface mount components and integrated circuits
throughout. Its circuitry is designed to operate at low stress levels for
longevity and ultrastable crystal controlled oscillators provide trouble-free
operation without the need for factory calibration or periodic
maintenance.
Two Models
NJD-4 BOOMERANG4 ™ is an FCC type approved model available in a low power
configuration (100 milliwatt). The NJD-4 is recommended for use by civilian
groups within the United States.
NJD-5 BOOMERANG4 ™ is a high power unit, available to US federal government
groups and for use outside of the United States. The NJD-5 has a 500
milliwatt transmitter for greater detection range especially in dense
materials. The NJD-5 also has an integral multistep attenuator to allow the
user to control the actual detection range by lowering the transmitter
output.
An important note about transmitter power:
When comparing nonlinear junction detectors, the most critical component in
the performance of a detector is the receiver sensitivity, not the power of
the transmitter.
ISA's NJD-5s typically detect a standard test target in our laboratory for
at least 16 feet (5.1 m). they do this with only 500 milliWatts of
transmitter power. Field tests of other manufacturers' products indicate the
NJD-5's detection range is 2-3 times greater. Competing products do not have
as great a detection range, even though they have transmitters that have 3 to
6 times the power.
This fact means that the BOOMERANG4's receiver has a much greater
sensitivity. This translates into more reliable operation, greater detection
range and much longer operating time between battery charges.
Specifications
Transmitter Power NJD-4: 100 milliwatts
Transmitter Power NJD-5: 500 milliwatts
Operating Frequency: 915 MHz
Receiver frequencies: 1830 & 2745 MHz
Antenna Polarization: Horizontal/Vertical, with lockable swivel mount
Power: Internal rechargeable gel-cell battery, external 12VDC, 110-240 VAC
Operational Weight: 16 lbs.
NJD-4 ……call for price
NJD-5 HI POWER EXPORT ONLY……call for price
