Biological & Chemical Protective Mask

           Home

Search Query

·          Effective against biological agents and these Chemical Warfare agents: GA, GB (Sarin), GD, VX, Mustard, and Lewisite

·          NIOSH/MSHA approved (TG-14G-0235) for protection against CN, CS, P100 particulate efficiency level and particulates

·          One piece polyurethane lens with wide field of vision is bonded to the durable Hycar™ rubber facepiece

·          Canister mounts on either side to allow weapon sighting from either shoulder

·          Adjustable, six-point head-harness for easy on/off.

·          Nose cup eliminates fogging and speaking diaphragm allows communication

·          Includes identification tag

·          Made in USA

·          Black

·          Includes one CBA-RCA canister

              National

              Security

 

           Surveillance 

 

             Counter 

           Surveillance     

 

        Communication     

 

            Explosive,

          Contraband,

           & Narcotics

            Detection

 

             Nuclear,

            Biological, 

           &Chemical

             Warfare

            Detection

           Corporate,

           Industrial,

         & Executive

  

         - About Us -

 

        - Contact Us -

 

     

Performance Against Various Chemical Agents

Tested to determine how effectively it can protect an individual against a variety of chemical agents . This canister contains a pleated high-efficiency (HEPA) filter to remove aerosols and solid particulates, and an impregnated activated carbon bed to adsorb (filter out) gases and liquid vapors. The HEPA filter removes nearly all of the tear gas agents from the inspired airstream. Any small amount of tear gas agent that passes through the filter is adsorbed by the impregnated activated carbon. Sarin (GB), DMMP (a Sarin simulant), and HCN are also effectively adsorbed by the carbon bed. The challenge agents are listed in column 1; testing conditions and requirements in columns 2, 3, and 4; and test results in the last column. The Flow Rate for all challenge agents was 64 ±1 Lpm, except for CK, which was 32 Lpm. Temperature was 25 ±3 degrees Centigrade.

Canister Testing Conditions and Results

Challenge Agent

Challenge
Concentration (mg/m
3)

Relative
Humidity %

Minimum Service

Time Requirement

RESULTS:

Service Time until Break, in minutes

Dimethyl Methylphosphonate (DMMP)
(Sarin Simulant)

Nerve agent

1000 ±70

25 ±0.5

60 minutes until a 0.04 mg/m3 break

>63

Sarin (GB)
Nerve agent

1000 ±70

25 ±0.5

60 minutes until a 0.04 mg/m3 break

>70

Hydrogen Cyanide (AC)
Blood agent

550 ±25

50 ±3

30 minutes until a 5 mg/m3 break

>40

HCN after Equilibration for 6 hrs @ 25% RH

550 ±25

50 ±3

30 minutes until a 5 mg/m3 break

>40

HCN after Equilibration for 6 hrs @ 85% RH

550 ±25

50 ±3

30 minutes until a 5 mg/m3 break

>40

ortho-Chlorobenzylidene Malononitrite (CS) Tear Gas
Irritant

23 ±8

50 ±3

480 minutes until a 0.4 mg/m3  break

>480

CS after Equilibration for 6 hrs @ 25% RH

23 ±8

25 ±3

480 minutes until a 0.4 mg/m3 break

>480

CS after Equilibration for 6 hrs @ 85% RH

23 ±8

85 ±3

480 minutes until a 0.4 mg/m3 break

>480

Chloroacetophenone (CN) Tear Gas
Irritant

101 ±6

50 ±3

480 minutes until a 0.3 mg/m3 break

>480

CN after Equilibration for 6 hrs @ 25% RH

101 ±6

25 ±3

480 minutes until a 0.3 mg/m3 break

>480

CN after Equilibration for 6 hrs @ 85% RH

101 ±6

85 ±3

480 minutes until a 0.3 mg/m3 break

>480

Oleoresin capsicum (C18H27NO3), the "active" ingredient of the OC tear gas
Irritant

0.036

50 ±3

None

>480 until a 0.001 mg/m3 break

Cyanogen Chloride (CK)
Blood Agent

Approx. 4000

80

None

5 to 9 until a 8 mg/m3 break